Can I Make Clones from Autoflowering Plants?
Growing cannabis is extremely interesting because you can experiment in several ways to get the desired outcome. Over the years, cannabis growers have come up with many techniques to increase yields, THC, and even clone plants.
Cloning marijuana plants has garnered a lot of attention because it automatically gives you more plants at the same cost. Generally, cloning is associated with photoperiod plants, but some artistic growers have experimented even with autoflowers.
But, have they been successful? Before we get to the answers, it’s important to understand the essence of cloning, so you can try it with your own autoflowers. So, let’s begin, shall we?
What exactly is meant by cloning cannabis plants?
Cloning is nothing but a method of propagating or producing more cannabis plants from one single mother plant. This technique is performed because of the asexual reproduction of your beloved cannabis plant.
Once the plant reaches a certain size, a healthy cutting is taken from the parent plant so that the cutting develops roots of its own and develops into another plant. Cloning is a sure-shot way to ensure that you replicate the mother plant.
So, why can’t I simply sow seeds of the mother plant to replicate it, you ask? Well, although planting seeds can give you some of the genetics of the parent plant, cloning guarantees that you get the exact replica with absolutely no changes.
Cloning is nothing but the process of producing an exact copy of a cannabis plant. In other words, you cut off a little part of the plant, and the cutting grows into another plant while resembling the mother plant.
So, for example, if you like Green Crack because of its awesomeness, a clone will give you another Green Crack plant without burning a hole in your pocket. This means that even if you have one single plant, you can get as many clones you want by taking cuttings. The cutting will have the same genes, sex, and characteristics of the mother.
Why are marijuana plants cloned?
There’s no point in cloning mother plants if you don’t understand why they are cloned in the first place. There are several benefits to clone your favorite strains:
- You get more plants without having to spend money on seeds
- You get the exact genetics of your favorite strains
- You can produce large quantities of plants and thus increase yields
- You can eliminate male plants by cloning only female plants
Generally, a new clone or cutting will grow just like the mother. After the buds are harvested and dried and cured, the smoke will also taste like the mother plant. However, in some cases, there may be slight differences owing to the nutrients, growing medium and even the way the buds are dried and cured.
How are cannabis plants cloned?
Like most other plants, marijuana plants can be cloned as well. Whether it’s due to the parent plant producing high yields, THC, a perfect aroma and taste or even because of the high, mother plants are cloned. The only thing to remember is that the cutting must be taken only when the plant is in the vegetative or growing stage.
With a photoperiod strain, you simply wait until the plant grows a bit. After you sow the seed, you need to wait at least 3-4 weeks for the seedling to do its thing. The plant must have a few branches that can develop into other plants on their own. At this point, use a sharp pair of scissors to take a cutting.
I repeat again that it’s imperative to take a cutting only when the plant is in the vegetative stage. Of course, you can clone even when it’s in the flowering stage, but it won’t be very successful. This is because the plant stops growing much once it enters the flowering stage.
It will put all its energy into growing beautiful buds and cloning at this stage will produce a plant that won’t have enough time to grow. Due to inadequate growth, the plant will produce very few buds. And, the result will be a small, stunted plant with almost no yield.
So, for the process of cloning, you choose a healthy female. It needs to be about 4 weeks at least. It must also possess 4-6 nodes for you to take cuttings. You must ensure that it receives a minimum of 18 hours of light to prevent it from entering the flowering stage.
Photoperiod strains start flowering when they get 12 hours of darkness, so make sure that it gets proper lighting to prevent flowering. You can allow the mother plant to grow and flower if you don’t need any more cuttings. However, if you wish to get more, it can continue to grow in the vegetative stage as long as you want more clones.
Some growers let the mother plants grow and flower to produce buds. They take cuttings from the clones later when they develop into bigger plants. Also, remember to label the plants if you’re taking cloning several plants to prevent confusion.
Once a cutting is taken from the mother plant, it is dipped in a rooting hormone powder or solution. The cutting is then placed in a seedling tray with some soil. It’s important to cover the cuttings with some sort of a dome so that it develops roots. Don’t place them in complete darkness, though. Partial light is best for them to get some roots.
After the roots grow a bit, you can introduce them to artificial light or sunlight and they will grow normally like any other cannabis plant. Cloning is perfect for photoperiod strains, but the question is if the same applies for autoflowering plants.
Find out how you can clone autoflowering plants in this video:
Can I make clones from autoflowering plants?
Autoflowers are different compared to photoperiod strains. Photoperiod strains start flowering as soon as they are introduced to a 12/12 cycle of light/darkness. However, autoflowering strains will start flowering irrespective of the light provided.
In simple terms, autoflowers have a preset cycle and they will start flowering within just 3-4 weeks of growth. Like photoperiod plants, autoflowers can be cloned as well. But, will the clones develop into other plants? Will the cloning will successful? That’s another question altogether.
It’s not impossible to clone autoflowering strains. They are normal plants just like other cannabis plants. But, the problem is that growers are rarely successful in cloning them. This is because of the way autoflowers grow.
The science of cloning is pretty simple. Cuttings taken from the mother plant grow are rooted so they can grow into new plants. But, it’s different with autoflowers only because of the genetics.
Autoflowers come under the Ruderalis species of cannabis. They are popular because they are the fastest to flower. They have a different timeline when compared to Sativa and Indica. In the wild, Ruderalis varieties adapted to the harshest of weather conditions.
While photoperiod cannabis growers need to wait a minimum of 5-6 months for their plants to grow, flower and produce buds, autoflowers finish their cycle within 3 months. Awesome, right?
Yep, they are amazing and can produce two batches of harvest in the time taken to produce one batch of photoperiod strains. However, it is due to this very reason that you can’t clone autoflowers successfully.
Why can’t you clone autoflowering strains?
Autoflowers have many benefits. Many growers specifically look for autoflowers when they purchase seeds because they are fast, produce great yields, and have a high content of THC as well. But, among the many advantages, the only disadvantage is that it’s not very receptive to cloning.
Since they don’t have a specific timeline to trigger flowering, it’s not possible to manipulate them. Now, with cloning, you need to cut a specific branch and dip it in a rooting solution. The cutting will develop roots on its own and grow into another big, beautiful plant.
All this process takes time, though. Photoperiod strains will start flowering only when they get 12 hours of darkness, just like in the wild. When cannabis plants realize that the periods of darkness are increasing, they start flowering. Obviously, you can manipulate the plant to grow as long as you want by providing 18 hours of light.
But, with autoflowers, you don’t have time. You don’t have the luxury of manipulating the growing or vegetative period because the plant will start flowering even if you provide 24 hours of light. For instance, let’s say you sow an autoflower seed. You wait a bit until the plant produces a few nodes. You see that the plant has several nodes to grow into other plants.
Imagine that you take a cutting. Or, maybe you can actually try this because it becomes even easier to understand why you can’t clone autos effectively. So, now you dip the cutting in a rooting solution and wait for it to develop roots.
Meanwhile, the mother plant continues to grow and starts flowering. Remember that the clone will perform exactly like the mother. So, the cutting is also in the flowering stage. And before it can even grow, it will start flowering.
In this process, you’ll be left with a small plant that has no time to develop proper roots either. With autoflowers, timing is everything, and since cloning requires time, it’s not possible to clone autoflowers.
What if I take the clone when the plant is just 2 weeks old, you ask? Well, the plant is too small to take a cutting. Firstly, you’d end up with a small cutting that probably won’t grow, but what’s worse is that you’d be hindering the mother plant’s growth too.
Even if you clone an autoflowering plant that’s already flowering, you’ll have stunted plants. If you love growing autoflowers, however, hope is not lost. You can’t clone them but that’s the only disadvantage. Instead of trying to clone them, you can plant several seeds and still get a high yield.
Remember that even clones of photoperiod strains need 5-6 months to complete their cycle. Autoflowers are super fast, so you can still enjoy great yields at a quick pace. The point of growing marijuana is to harvest and smoke them as soon as possible, so autoflowers are simply perfect to achieve your desired outcome even if they can’t be cloned.
Growing cannabis is extremely interesting because you can experiment in several ways to get the desired outcome. Over the years, cannabis growers have come up w
Is It Possible To Clone Autoflowering Varieties Of Cannabis?
It’s often said that autoflowering cannabis strains cannot be cloned. Considering that cloning is an easy and economically efficient way to grow weed, this would be a real shame. So, is this claim true or false?
Cloning a cannabis plant is an extremely interesting process. It involves taking a cutting from an already established “mother” plant, and using this cutting to generate an entirely new and independent plant. What’s more, the new plant will share identical genetics to the mother that it was cloned from.
This means that cloning is an excellent way for cannabis growers to preserve the genetics from a particular strain that they adore. The new clone will share all of the original characteristics, from the way it tastes to the high that it produces.
Cloning cannabis plants is also economically appealing to many growers. It means that they don’t have to keep buying seeds in order to grow the exact same strain; instead, they can simply take a cutting from the prized plant within their crop and create a homogeneous copy. With all these benefits, it might seem as though cloning should be a technique that all growers use, all of the time. However, the method does indeed have its limitations.
One significant limitation is that autoflowering strains of cannabis are quite difficult, though not impossible, to clone successfully. Considering that autoflowering varieties have some massive advantages over traditional strains, such as compact sizes and rapid growth time, this may put many cultivators off from cloning altogether.
It is a common myth within the cannabis community that autoflowering strains simply cannot be cloned. On the contrary, it can be done, but it may not be worth it. Why are autoflowering strains harder to clone?
THE DIFFERENCE BETWEEN AUTOFLOWERING AND PHOTOPERIODIC STRAINS
To discover why growers don’t see impressive results when attempting to clone autoflowering cannabis strains, we need to observe what it is that sets this breed of plants apart from the rest. Autoflowering strains pretty much do exactly what their name suggests – they flower automatically based on time, rather than on environmental factors like photoperiodic strains.
Photoperiodic plants require a change in the amount of light they receive each day in order to go from the vegetative phase into the flowering stage.
This distinction is largely due to evolutionary differences. Autoflowering strains are known to have evolved in northern regions of the world where there is much less sunlight throughout the year. This led them to develop the ability to flower automatically over certain periods of time.
This trait makes them very appealing to beginner growers who do not have to go through the task of changing the light cycle in order to start flowering and achieve a successful yield of high-quality buds.
Photoperiodic strains evolved closer to the equator. When grown indoors, they require a light cycle change which simulates the approaching autumn and encourages them to march towards flowering and seeding before the weather becomes too harsh for them to continue to survive.
WHAT DOES THIS MEAN FOR CLONING?
So, what does this genetic difference mean when it comes to the craft of cloning cannabis plants? Well, remember when we talked about how cloning results in an exact copy of the mother plant? This literally means that every trait is carried over, even the age of the plant when the cutting was taken.
The cutting will follow the same genetic timeline as the mother and will continue approaching the flowering stage, regardless of its size and development. In the case of autoflowering strains, this usually results in small and underdeveloped specimens with minimal yields to offer.
Photoperiodic varieties are far superior when it comes to cloning. If the cutting is taken during the vegetative phase and the light cycle remains the same, it will have the chance to grow and flourish within the vegetative phase. Only when the plant has reached an optimal size will the grower elect to shift the light cycle and initiate the flowering stage.
CAN IT BE DONE?
It has been reported that some growers claim to have successfully cloned autoflowering varieties. Cloning an autoflowering plant is indeed possible, but the outcome will surely be suboptimal. If a grower attempts this in order to boost yield, instead of for experimental purposes, they will surely be met with disappointment.
Many within the cannabis community claim that autoflowering varieties of the plant cannot be cloned. Is this just a myth or a fact?