Can You Smoke Marijuana Leaves?
The question about “Can You Smoke Marijuana Leaves?” is often answered differently by different smokers. Normally, growers cultivate marijuana to obtain their high-quality buds for smoking. However, you can still do a lot of things with other parts of the plants. For example, you can roll a joint with the leaves of Marijuana.
First off, for curious smokers/users who are interested in knowing whether you can smoke cannabis leaves, Yes! It can be smoked; it was done in the past. However, it didn’t result in a customer’s satisfaction as it did not pose a high concentration of THC.
How is marijuana leaves different from the buds?
Buds were quick to gain notoriety for their staggering THC contents; by this, the leaves have faded into the abyss. However, there are weed leaves that can still be useful, a lot of people in today’s generation mash these leaves up and add them to the mixture that was obtained from the buds, in a Hookah or a Pipe. marijuana leaves can also be a decent substitute if you happen to run out of Cannabis.
For some people, they are not willing to add leaves in their marijuana, as it changes the flavors and texture of the smoke. Others prefer tobacco to add some spice to their flavors. Some people also don’t like smoking the leaves because they give headaches, so it is with the best interest to have them mashed and mixed with other marijuana strains.
Also, it should be noted that not all marijuana leaves can be smoked. In fact, users must avoid the largest leaves. Growers often use fertilizers when cultivating marijuana plants, when leaves are treated, they contain the highest amount of chemicals in it.
However, to put things on a clear note, Yes, the cannabis fan leaves can be smoked. For people still asking can you smoke cannabis leaves, here are some guidelines on why you can.
Cannabinoids are all over the plant!
Aside from the inside of the roots and stems, the Cannabis plant also has cannabinoids all over the plant. This is because the resin glands are all over the plant. However. Even if leaves are contained with cannabinoids, they boast only small traces of THC and CBD contents.
Also, there are different kinds of leaves in the cannabis plant. Everyone who takes a closer look at the buds should have a good understanding that they contain a large part of trichome-sparkled leaves. However, the leaves that surround the buds should not be put in the same category as the big-fan leaves when you factor in the amount of THC and CBD.
You need big amounts!
As was said earlier, marijuana leaves contain small traces of CBD and THC, so if you are looking to smoke them, make sure to have plenty. In general, weed leaves contain about 0% to .4% of CBD and THC, so a handful of them might not do the trick.
But if you happen to trim your leaves that stand out from the buds before it was harvested, you could see clearly that there are THC trichomes that are visible to the eye.
So, to sum it up, there is a varied range of marijuana leaves. However, all of these leaves vary from strain to strain, and each respective strain offers different contents of THC and CBD. So, they all differ from cannabinoid profiles.
Therefore, it is hard to say how high you can get from smoking marijuana leaves. Plus, your tolerance to its effects also plays a major role!
What are the types of marijuana leaves you can smoke?
Not all leaves are created of the same quality. As we said earlier, they vary from marijuana strains to another. However, all types of leaves a marijuana plant contains viable benefit for the entire plant. But if you really want to smoke marijuana leaves, it is important which type is best suited for smoking.
They are usually found near the buds. This is the good part other than the buds. They are relatively small when compared to other types. They were named Sugar leaves because they are usually concealed in trichomes giving them a sugary white coat appearance, and these trichomes have THC.
I associate leave trimmings to sugar leaves because trimmings are just plain cuttings of the leaves that are added to sugar leaves. They are cut-off leaves that are also near to the buds. So, rather than cutting the entire leaves, you just simply trim it and add it to your sugar leaves mixture.
Both Sugar leaves and trimmings can possess THC because they are covered with trichomes. Although it will not give you an overpowering high as the buds do, they can certainly get the job done.
While sugar leaves are closer to the buds, the fan leaves grow the farthest to the buds. These leaves play a pivotal role in soaking up plenty of sunlight and other nutrients for your marijuana plant to grow. However, they don’t contain as much THC content as the sugar leaves do.
However, some fan leaves may contain high amounts of THC, so it is best to have it a try. Check the stems whether they contain trichomes; stems sometimes contain trichomes too. In the end, if you are really looking to get high, we highly advised that you take the Sugar leaves/trimmings route. It would just take a large number of leaves before you even get light headed, let alone be high.
Are there other alternative options?
If you are just looking for ways to get high, and smoking cannabis leaves isn’t your best choice. We’ve listed some options that may able to get you high.
Cannabis is edibles quickly gaining popularity; however – there is a downside when taking cannabis edibles orally when you ingest cannabis edibles orally; it will not be transported directly to your endocannabinoid system but by the liver.
When cannabinoids are absorbed by the liver, they only amount to a small proportion. This means that little amounts are only being absorbed; thus, eating cannabis might not sound good at all.
When you are just about to toss away your marijuana leaves, pause for a moment, those are still valuable leaves in large amounts. As was said earlier, they only amount to small portions, but if you have a large number of leaves, those little portions could result in one big serving.
A good way to deal with those little amounts of marijuana leaves is to extract them. There are tons of ways on how to extract them, but the safest and easiest way is having them extracted in an Ice-O-later hash maker. With this equipment, you could extract only the trichomes that are sticking in the leaves of the stem.
Although the extracted amount is little when compared to regular buds, there is still something to be added, right? Doing it won’t hurt you anyways. Can you smoke marijuana leaves should be answered by you, there are many alternatives out there that maximize its uses. It is up to you and your imagination!
The answer to the question, Can you Smoke Marijuana leaves is already up there. I hope we helped answer your curiosity. There are plenty of ways how to use them, and sometimes, it is up to us to make the most out of everything we have! A curious mind will go a long way!
Are marijuana leaves good for smoking? Satisfy your curiosity with the answer to the secret of smoked cannabis leaves.
The Marijuana Leaf: Everything You Need To Know
By Anthony Franciosi
The Marijuana Leaf: Everything You Need To Know
Long before it became a ubiquitous symbol of the modern global cannabis community, the marijuana leaf was a source of powerful inspiration (artistic and otherwise) for stoners in many cultures throughout history.
In this post, the all-things-cannabis experts at Honest Marijuana break down the biology behind the most common types of the marijuana leaf in addition to showing you a few leaf variations you may not have heard of.
We’ll also make sure that you can spot signs of poor leaf and plant health. Lastly, we’ll discuss the benefits of juicing and cooking your leaves into cannabutter in order to make the most out of them.
A Brief History Of The Marijuana Leaf
The cannabis plant has been around for a long, long time. Longer, in fact, than many people realize.
Stoners of yore — and we’re talking extremely yore — have been drawing the marijuana leaf on cave walls for millennia.
Take, for example, this cave painting in Kyushu, Japan dated from around 10,000 years B.C.
See the seven-lobed indica leaves in the orange circles? Ancient marijuana, man! And is that a unicorn at the top? Methinks it is! It’s no wonder that some of the best cannabis in the world comes from this area .
And lest you think the cannabis craze was isolated in the far east, check out this illustration of the Egyptian goddess Seshat. Pharaoh Tuthmosis III described this deity as, “she of the seven points.”
She’s obviously got marijuana on her mind. Smart lady.
Even the ancient Greeks got in on the marijuana-leaf action. Below is an illustration of the cannabis sativa plant taken from the Vienna Dioscurides, a Greek medical textbook, dated at around 512 A.D.
Scientists now call these ancient plants landrace strains because they are very different from the high-THC and high-CBD strains you can buy at your local dispensary.
Landrace strain or brand-new variety, it’s obvious that humans have recognized the marijuana leaf (and the cannabis plant as a whole) as a source of artistic inspiration, medicine, and, yes, psychedelia, for at least 12,000 years — and probably a lot longer.
Isn’t that groovy, man? We’re part of a long history that stretches back to before the domestication of crops and animals. Can’t say that about too many things these days.
Now that you know a bit about the history of the marijuana leaf — this really is a tiny amount; there’s so much more to learn — let’s turn our attention to the types of marijuana leaf we see today.
The Marijuana Leaf: Types
All of the different types of cannabis leaves belong to the general umbrella category or genus known as Cannabis sativa L .
The “L” in the plant’s genus name stands for Carl Linnaeus’s last name. He was the first to identify and name the species in 1753 according to the modern taxonomic nomenclature that he developed.
Linnaeus didn’t “discover” cannabis —- remember its use stretches back thousands and thousands of years — rather, he established the classification system (binomial nomenclature) that we’ve used for the past 260-odd years to describe plants and animals (even ourselves: Homo sapiens ) and keep everything straight in our heads.
Biology lesson complete, let’s dig into each type of marijuana leaf to see what we can learn.
Large cannabis sativa leaves can have up to thirteen long, slender, pronounced, jagged, spiky serrations.
The coloration of sativa leaves ranges from light to dark green.
Sativa leaves can come from either female plants — from which we harvest the smokable weed we all know and love — or from the male plants known as hemp.
Hemp plants produce more CBD than THC but are typically grown for a mind-blowing array of renewable, eco-friendly, industrial, planet-saving purposes.
Check out the illustration below for just a few of the many uses.
So even if you can’t use the marijuana leaf as medicine or to get high, you can use it and other parts of the plant for some truly righteous things.
Linnaeus mistakenly assumed that the cannabis genus was monolithic, meaning that it only had one species — the sativa variety itself.
There are, however, several other varieties of marijuana leaves that grow from the different subvarieties of the Cannabis sativa plant. Case in point: Cannabis indica.
Cannabis indica leaves typically grow much shorter and wider than sativa leaves and contain seven to nine olive-green leaflets.
French biologist Jean-Baptiste Lamarck coined the name Cannabis indica in 1785 to account for the differences between the Cannabis sativa hemp grown mostly for agricultural purposes in Europe and the Cannabis indica plants grown for medicinal purposes in India.
Russian botanist D.E. Janischevsky identified a third species of marijuana plant that he named Cannabis ruderalis. Cannabis ruderalis grew across eastern Europe and was commonly used by Russians and Mongolians to treat depression.
There is some debate as to whether Cannabis ruderalis is actually its own species.
The leaves of the ruderalis plant possess five to thirteen leaflets and are very similar to those of the indica leaf. The only significant difference being that ruderalis leaves are somewhat smaller and narrower.
Ruderalis grows wild and doesn’t have as much THC content as the other species of cannabis plants.
In recent years, growers have experimented with crossbreeding ruderalis and indica plants in an attempt to create strains with shorter growing seasons.
Cannabis sativa and ruderalis crossbreeds have produced strains that flower automatically without having to reduce the amount of light (i.e., number of hours) to which the plant is exposed.
Wild Weed Leaf Variations
Marijuana is a very adaptable, dynamic plant that loves to mutate if given the chance. We’ll discuss three common mutations of the marijuana leaf.
However, it’s worth knowing that deliberate attempts to grow marijuana plants with these mutated leaves don’t always produce the best medicinal cannabinoids.
The Webbed Marijuana Leaf
Growers of the past (i.e., before cannabis was legal) attempted to stabilize the webbed mutation in order to disguise their plants from the prying eyes of The Man.
These webbed varieties have fallen out of favor in recent years because now growers can plant and cultivate the regular varieties (sans mutation) right out in the open.
If you’re interested, you can still obtain webbed varieties on the internet (Ducksfoot is a common option), but you’ll have to grow them from seed.
The Whorled Marijuana Leaf
In recent years, some growers have come to believe that plants with a whorled marijuana leaf produce flowers with higher potency. There is, however, no scientific evidence to prove this belief true.
Australian Bastard Cannabis
Australian bastard cannabis is another common marijuana mutation. The plant has hairless leaflets with no more than five points, which are only a few centimeters long.
As novel as these mutations may be, the best results for growing your own cannabis will come from cultivating a seed that comes from a healthy plant with normal characteristics.
To help you get the most out of DIY grow operation, we’ll now discuss how to keep your plant in good condition .
Signs Of Sickness In The Marijuana Leaf
The leaves of your pot plant are clues to all sorts of issues that your plant may encounter during the growing process.
Your leaves will show specific discolorations and deteriorations if the plant is deficient in key nutrients, such as boron, calcium, copper, manganese, molybdenum, phosphorus, potassium, sulfur, or zinc.
Boron deficiency is characterized in two ways:
- Large gray or brown spots on the marijuana leaf
- Soft, purple stems between the marijuana leaf and the main body of the plant
To prevent boron deficiency, make sure your plants don’t dry out too often, don’t over-fertilize, and make sure the humidity in your grow space is above 25 percent.
Molybdenum deficiency is difficult to diagnose because it looks so much like other issues, such as nitrogen deficiency and calcium deficiency.
Molybdenum deficiency usually rears its ugly head by causing the marijuana leaf to develop brown, crispy edges and orange or pink shades in the center.
The best solution for molybdenum deficiency is to flush the growing medium with pure 6.0 pH water and then to make sure the pH of your soil is perfect from there on out.
Magnesium deficiency is characterized by a yellowing of the marijuana leaf and tips that eventually become dry, brown, and crunchy.
Curing your cannabis plant of magnesium deficiency involves flushing the substrate with 6.0 pH water, feeding the plant with an optimal-pH fertilizer, and then adding a high-quality, cannabis-specific magnesium supplement into the mix.
The Best Way To Avoid Deficiencies
You can avoid these deficiencies entirely by utilizing tried and true organic marijuana growing methods involving proper cannabis compost and our super soil formula for organic 420 fertilizer .
You can still add specific organic nutrients to the soil and stimulate new ganja growth if you keep the PH range of the soil optimal for the specific nutrient.
You’ll need to flush your lines with clean, neutral pH water containing half the plant’s nutrients for the deficiency to clear up and to stimulate new growth if you’re using hydroponic growing methods.
You’ll know you’re overwatering if the marijuana leaves grow firm, droop, and curl down toward their stems. At that point, they are essentially starving for oxygen.
If you see this happen, you’ll need to cut back on watering and give them time to recover.
You can try increasing the temperature from the lights and your airflow if you are growing indoors to speed up water absorption. You can also poke some holes in the soil with a pencil to give them some oxygen. Your plants may also require a better drainage system.
The serrated edges of the leaves will begin to curl up if they are exposed to too much natural or artificial light.
You’ll see yellow and brown burn spots on the leaves if they receive too much light or especially direct contact with a bulb.
To alleviate these issues, decrease the intensity of your lighting and increase air circulation with fans to help your indoor plants recover. Hang a large cloth or sheet or build some other source of shade for your outdoor plants.
Water them in the early morning and late evening to help them retain water and recover from heat and light stress.
Making The Most Out Of The Marijuana Leaf
Soaking your freshly harvested marijuana leaves in cold water for five minutes and then juicing them with some lemon, apples, carrots, beets or other vegetables is an extremely easy and incredibly healthy way to make the most out of your marijuana leaves.
Juicing your cannabis leaves won’t transform the raw THCA acid into the psychoactive THC cannabinoid that will get you high. However, many patients love experiencing the health benefits without the euphoric high by juicing ganja leaves.
Kristen Peskuski was bedridden, taking forty medications a day, told she would never be able to have children, and was near death due to a degenerative condition known as Systemic Lupus Erythematosus when Dr. William Courtney (pictured above) prescribed raw cannabis juice.
Kristen recovered, married Dr. Courtney, and wound up giving birth to a healthy daughter without any complications or medical intervention.
This high-powered, 420-friendly family has since become a leading advocate for the miraculous medicinal powers of raw cannabis leaf juice.
Don’t Smoke The Leaves!
Well, actually you can! However, smoking raw marijuana by itself will only give you a mild buzz as opposed to a proper euphoric high .
This is why we don’t recommend smoking marijuana leaves unless you’re using them to smoke good ground bud by rolling it into a custom joint for yourself!
You can also harvest the THC-bearing trichomes on your marijuana leaves into an edible 11-Hydroxy-THC body high by cooking your leaves into cannabutter .
A Quick Cannabutter Recipe
Wash and soak about 3.5 ounces (100 grams) worth of your freshly harvested pot leaves in cold water for five minutes the same way you would before juicing them.
Then chop and grind up your leaves.
Toss in about 4 grams of your favorite ground weed bud for good measure.
Heat and simmer the ground weed leaves with equal parts butter and water in a saucepan for 30 minutes, stirring occasionally.
Pour the mixture through a strainer to remove leftover plant matter, and let the mixture refrigerate to solidify into cannabutter that you can use to make a wide variety of marijuana edibles.
You can also harvest the trichomes from the marijuana leaves by using a grinder with a kief catcher to grate the plant matter. Once you’ve collected enough kief, you can sprinkle it in your joint before you close, mix it in your breakfast smoothie, or go crazy and make some moon rock weed .
The sky’s the limit at that point, so get creative with your kief.
A Quick Guide To Grinding Your Marijuana Leaves
Here’s how to collect the most kief from a four-piece grinder:
- Get a four-piece grinder (duh!).
- Make sure the grinder is clean .
- Assemble the grinder so it’s ready to go.
- Tear the marijuana leaf into small pieces that will fit in your grinder (depending on how many leaves you have, they may not all fit in the grinder at one time).
- When the grinding chamber is empty, reload and grind again.
- If the collection chamber fills up, empty the ground-up plant matter into a bowl for further processing.
- Once you’ve pulverized all your marijuana leaves, put the already-ground plant matter back into the grinder and grind some more.
- This time around, before emptying the collection chamber, bang the grinder against your hand or a table (gently) to separate more of the kief into the kief chamber.
- When you’re all done with the second round of grinding, we suggest steeping the ground-up plant matter in some hot water to make a weed tea .
- While your tea’s brewing, empty the kief chamber of its contents so you can use the powder as you see fit.
- Alternatively, you can leave the kief in the grinder and collect more when you grind your raw bud. It’s up to you.
If you do decide to store the kief in the grinder, we suggest at least cleaning the other parts of the grinder. That way the marijuana leaf plant matter doesn’t dilute the full-strength ganja you’re going to grind next time around.
Leafing You Dazed and Educated!
As a final reminder, it’s important to keep your leaves healthy so that you can enjoy the immense health benefits from juicing or creating cannabutter with your freshly harvested marijuana leaves.
Want to get to know the pot plant better? Learn about the marijuana leaf. The experts at Honest Marijuana tell you everything you need to know.