Weed joint filter
Creativity is the great way to explore
Minimal design with a hint of colour
The best chance to take
What Are Joint Filters & Why Use One?
Joint smoking has been around a couple hundred years in its modern form. Recreational joint smoking was started by Mexican field hands in the late 1800s and brought to America by Mexican immigrants when they started migrating north for more opportunity and a piece of the American dream. Joint smoking really hasn’t changed in the 200 or so years it has been around, but what goes in and on your joint has been majorly overhauled in recent years.
It’s not only the flower that has taken leaps and bounds forward but joint filters as well. Joint filters or joint crutches are little devices that act as a mouthpiece between your lips and joint. Joint filters serve multiple purposes and increase the user experience of smoking a joint.
Reduce “Scooby Snacks” – Scooby snacks are the unwanted scraps of cannabis that stick to your lips and tongue after hitting the joint. Joint filters create a barrier of separation between the flower and your mouth and completely negate the scooby snack phenomenon.
Reduce Tar – While cannabis has numerous medicinal benefits, smoking cannabis can be hard on your lungs. Cannabis smoke releases many of the same carcinogens that are found in cigarettes. I’m not saying smoking cannabis is equivalent to smoking cigarettes, but inhaling smoke into your lungs isn’t great for lung health period. Joint filters can catch some of the extra tar and chemicals found in smoke, reducing bronchial irritation slightly.
Reduce Burns – Joint filters add a barrier of separation between your fingers, lips and the burning embers. Many times the heat from a joint roach will scorch your fingers or lips.
Reduce Coughing – Reducing the tar will also reduce the amount of coughing experienced while smoking. Some users suffer from bronchial sensitivity and are hit with major coughing attacks after just a few hits of cannabis. A good joint filter will help reduce coughing fits, but how much really depends on the user.
Construction – Joint filters add a level of structural integrity to any pre-roll. The filter creates an anchor point when rolling and helps keep the joint intact when it’s being passed between multiple people.
No More Roaches – Joint filters allow you to smoke the entire roach and reduce wasted weed.
Filter420 Joint Filter – Filter420 has taken the joint filter a few steps further. Filter420 has engineered a pre-roll filter that can be used for filtering out toxins. Filter420 joint filters can be bought wholesale or in packs of three for individual use. These devices are constructed out of sturdy sterilized plastic that is safe to breathe through and won’t break when it’s in your pocket.
The device has three sections; the tip, chamber, and mouthpiece. The tip has a bright green color to easily show where the pre-roll is inserted. The chamber is filled with silicon beads that do the majority of the work, catching tar and chemicals in cannabis smoke. The mouthpiece prevents any heat from the embers hitting your fingers or the back of your throat. You visibly see the tar build up through the clear plastic, giving a clear visual representation of the gunk that was kept out of your lungs.
Learn About Joint Filters And Get Tips You Can Use Today to Revolutionize Your Smoking Experience With A Joint Filter Today!
How to Make a Filter (Crutch) and Roll a Filtered Cannabis Joint
Thursday November 21, 2019
W hether home growing your own cannabis flower or picking up some tasty nugs from a dispensary, there’s something about the process of rolling and smoking a cannabis joint that makes the experience so much more rewarding. Though we’ve discussed the basic procedure for rolling a joint in the past, today we want to discuss another element of the whole doobie-rolling process: rolling a filtered joint.
Why Use a Filter in a Joint?
A filter, or crutch, is a great way to improve the joint smoking experience by improving airflow, maintaining the integrity of a joint, and blocking little bits of weed from hitting the back of the throat upon inhale. Additionally, many joint-rolling experts use filters as a form of creative expression, for example, by shaping them into a pot leaf or other 420-friendly symbol.
How to Roll a Filtered Joint
Filters are the stiff cardboard-like paper on the mouth end of most dispensary joints. Though most dispensaries use pre-formed “cones” in which to stuff ground cannabis, you can roll something similar using regular rolling papers and a crutch or piece of card stock. There are even brands that make books of filter tips that allow you to roll a filter consistently every time.
To roll a filtered joint, gather the following items:
What You’ll Need:
- Rolling papers such as Raw or Element brands
- Cardboard crutch or a 1X2” piece of untreated cardboard stock
- Fully cured cannabis flower, ground
- Herb grinder
- Begin by grinding about half to one gram of cannabis flower into a soft texture then set to the side
- Next, hold the unused filter or card stock by the short side and fold quarter-inch of the filter up toward the opposite end
- Turn the filter over and fold another quarter-inch up toward the opposite end so that an accordion shape starts to form
- Turn the filter paper over and fold a third time, creating an “M” or “W” shape. There should be just over an inch of unfolded filter at this time. You can also make a spiral shape instead of a “W” if you prefer
- Hold the three folded sections together and wrap the remaining unfolded filter around the three folds so that the “W” is wrapped in the rest of the filter
- At this point, you should have a round filter with the letter “W” (or “M”) proudly displayed in the middle
- You can adjust the size of the filter by tightening or loosening the wrap around the “W. Set your filter to the side
- For the next step, hold a rolling paper in your non-dominant hand with the glue strip farthest away from you
- Sprinkle your ground bud along the crease of the paper ensuring even distribution across the length of the paper. Place your filter along one side of the paper, usually the side closest to your non-dominant hand
- Pinch the rolling paper between your thumbs and index fingers and roll gently back and forth until the cannabis begins taking a cigarette shape
- Once the bud has taken form, roll the flower to the base of the paper (closest to your body), tuck the end of the paper closest to you between the rolled flower and the other side of the paper then gently roll up so that the flower becomes trapped inside of the paper. Lick the glue strip on the rolling paper then finish rolling to glue the loose end in place.
If necessary, you can push the filter back inside of the joint, ensuring that there is no gap between the filter and the cannabis inside of the joint. Use a pen or other tool to poke cannabis from the end opposite of the filter deep into the joint then twist the end to hold all cannabis in place and give you an easy place to light your joint. Take a moment to admire your work them spark it up, and enjoy!
We love using filters on our home-rolled joints. Do you? Share your thoughts, tips and techniques in the comments below!
Abby is a writer and founder of Cannabis Content, a marketplace designed to connect cannabis writers and creatives with businesses in the industry. She has been a professional cannabis writer since 2014 and regularly contributes to publications such as PotGuide and M&F Talent. She is also the Content Director at Fortuna Hemp, America’s leading feminized hemp seed bank. Follow Abby on Facebook, Twitter, and Linkedin.
Rolling a filtered joint is considered the standard for cannabis consumers nowadays. Learn how to roll a filter tip for your joint and how to include it in your next rolling session.